Scientific Instruments

We have in our collection a qualitative assortment of Biosafety Cabinet. These are fabricated and designed in accordance with the international quality guidelines. Our skilled professionals make use of first-class grade components to fabricate these cabinets. Additionally, these cabinets have broad usage in pharmacy applications, which include manipulation, preparation or designing of carcinogenic and cytotoxic drugs.

Features:

• Main body should be mad in mild steel (Heavy gauge- 19 G)
• Table top and working zone should be made of stainless steel (304 grade)- Heavy gauge- 20 G
• Table top should be in two parts: Front perforated portion 5” in size, Non perforated working zone, Work Area should be approximately 2 X 2, 3 X 2, 4 X 2 with shutter opening of 489 mm
• Air Flow should be vertical down ow with 70 % Circulation 30 % exhaust.
• Cleanliness level should be less than 3.5 particles/ liter of 0.5 mm and larger .
• Noise Level should be less than 65 db.
• Vibration level: Less than 2.3 mm.
• Average air ow should be 90±20 fpm (down ow).
• Door fully automatic.

Specifications:

• HEPA filters should be MINI PLATE with 99.99% efficiency for 0.3 micron with integral metal guards & filter frame gaskets and manufactured in class 100 super clean air conditioned environment for longer life.
• Air pressurization system should be statically and dynamically balanced, fitted with special vibration reducing system to suit low noise and vibrations.
• UV lamp should be in working zone (40 micro watts/ square cm at 254 mm or better) and placed so that the operator cannot see directly i.e. eyes should be always protected.
• Should have Rehabitable pre filters should have efficiency of more than 80%.
• Should have Switches & Electrical sockets outlets for 15/5 amp.
• Should have Pressure Monitors like Magnehelic gauge are required to indicate pressure drop acr.
• Exhaust blower should be capable for 100% exhaust interconnected with supply air blower; system should only start when the negative pressure is develop
• Back holes should be there on vertical walls to provide more work area on table
• Should have Switches & Electrical sockets outlets for 16 amp.
• Suitable power supply 230 volt a/c.

Our firm is among the applauded names in the industry for manufacturing and supplying a broad array of Vertical Laminar Air Flow. The offered product is developed and fabricated in tune with the industry norms and has gained us loads of profits. This product requires low maintenance, it is durable and is easy to install as well. Apart from this, offered product is used for ventilating and conditioning air in hospitals and commercial complexes.

Features:

• Ultra Violet Light
• Operating Switch
• Manometer
• Filtration efficiency 99.99% at 0.3 micron
• Protective fiber grill
• Lowe noise level
• Durable and easy to clean
• Spare parts available at stock
• Fully made by mild steel powder coated
• Motor & blower 1440 rpm

Specifications:

• Working Area: Class 100
• Size: 2 X 2, 3 X 2, 4 X 2, 6 X 2
• Particle Retention: 0.3 micron
• Velocity: 90 FPM ± 20 %
• Illumination: 750-800 Lumen
• Noise Level: 60 - 65 Decibels
• Power Supply: 220 Volts
• Work Surface: 304 Stainless Steel
• Side Walls: 304 Stainless Steel
• Florescent Lights: Optional
• Acrylic Door: Optional
• Caster Wheels: Optional
• Gas Cock: Optional

Other Detaails:

• Double walled cabinet mounted on caster wheels
• Inner chamber made of S.S.304 & Outer chamber made of M. S. Powder coated
• Full-Length inner acrylic door permit inspection of specimens without disturbing the Temp
• Temp. Controlled by solid State Digital controllers housing all the control with PT-100 sensor illumination light are provided for viewing with door limit switch
• CFC Free hermetically sealed compressor provide temp. For below ambient condition
• Air circulation fan for maintaining Temp. Uniformity throughout the chamber
• Flush fitting insulated double walled door
• The Chamber is provided with modular removable shelves made of S. S. For complete flexibility in use
• To work on 230 volts 50 H2ICH Guide Lines followed.
• S.S. removable to prevent overshoot.
• Safety thermostat to prevent overshoot.
• HRC fuse for all controls.
• Bacteriological incubator are non refrigerated version for temp.
• Range of ambient + 5°C to 60°C

Specifications:

Fume Hood

Manufacturer & Supplier of Fume Hood. Our product range also comprises of Laboratory Autoclave, Bio Safety Cabinets and BOD Incubator.

Our firm has set standard in the manufacturing and supplying Fume Hood which has precise design and remarkable construction. These hoods are built with optimal quality material that is acquired from our trusted and certified vendors. Furthermore, these hoods are broadly used across the industry and are fairly popular due to its long functional life and high quality. Our offered hoods are available in market at pocket friendly rates.

Specifications:

• Introduction: Cabinet Structure: Material: All steel (1.0 mm cold-rolling steel or 1.0 mm stainless steel) covered with electrostatic spraying after folding, welding, polishing, acid cleaning, phosphorization,chemical resistance.
• Inner liner panel: Imported from 6 mm compact panel, acid and alkali resistance, temperature -resistance, anti-moisture.
• Guide plate: Imported from America, 6 mm compact panel, reasonable and knock-down guide structure. Concentrated and effective discharge air , letting off different poisonous gas.
• Operation Table board: lab-grade phenolic resins worktop, or epoxy resin worktop, or ceramic worktop and stainless steel as worktop.
• Window: 6 mm thickness steel safe glass, balancing form elevation and subsidence, it can be stopped at any position by pulling .
• Lighting equipment: 30 W antisepsis daylight lamp, lamp house is insulated with gas. Lightness on table not lower than 400 LUX.
• Operation panel: lighting switch, ON/OFF switch, two sets of 220 V/10 A versatile electric socket.
• Ventilation equipment: selecting rust-resistance, low wasting, low noise and famous fan and special wind tube. Noise can be reduced at about 55 DB.
• Accessories: vertical and single test cock: made by yellow brass, the surface is treated by EPOXY baking paint.
• Cup slot: Acid and alkali resistance, PP water cup.

Product Details:

Specifications:

• The main body should be mad in mild steel (Heavy gauge- 19 G)
• Table top and working zone should be made of stainless steel (304 grade)- Heavy gauge- 20 G
• Table top should be in two parts: Front perforated portion 5” in size, Non-perforated working zone, Work Area should be approximately 2 X 2, 3 X 2, 4 X 2 with shutter opening of 489 mm
• Air Flow should be vertical down low with 70 % Circulation 30 % exhaust
• Cleanliness level should be less than 3.5 particles/ liter of 0.5 mm and larger
• Noise Level should be less than 65 dB
• Vibration level: Less than 2.3 mm
• Average air ow should be 90±20 fpm
• Door fully automatic
• HEPA filters should be Mini Plate with 99.99% efficiency for 0.3 microns with integral metal guards filter frame gaskets and manufactured in class 1000 super clean air conditioned Air pressurization system should be statically and dynamically balanced, environment for longer life.
• Fitted with special vibration reducing the system to suit low noise and vibrations. UV lamp should be in working zone (40 microwatts/ square cm at 254 mm or better) and placed so that the operator cannot see directly i.e. eyes should be always protected. Should have Rehabitable pre-filters should have the efficiency of more than 80%. Should have Switches Electrical sockets outlets for 15/5 amp. Should have Pressure Monitors like Magnehelic gauge are required to indicate pressure drop air. Exhaust blower should be capable for 100% exhaust interconnected with supply air blower; the system should only start when the negative pressure is developed Back holes should be there on vertical walls to provide more work area on Should have Switches Electrical sockets outlets for 16 amp. Suitable power supply 230 volts a/c